Metal roofs, shingle roofs and honest repairs for French Lick, IN homeowners. Family owned since 2002, and estimates are always free.
Everything we do on a roof, done by crews who have been doing it the same careful way since 2002.
If two other people have caulked it and it still leaks, call us. Most stubborn leaks turn out to be flashing, a valley, or a fastener nobody thought to check.
Removing the ice is the easy half. We also look at ventilation and insulation so it stops happening every January.
Hard wind lifts shingles and works panel fasteners loose along the edges, which is exactly where the next storm gets underneath. We refasten, replace and reseal.
Small repairs get the same crew and the same care as a full roof. Free estimate, a price in writing, and the work done before the next rain moves in.
A metal roof is the one that outlives the mortgage. We install exposed fastener panels and standing seam over solid decking and real underlayment, with around twenty standard colors to choose from.
A careful walk over the whole roof — panels, shingles, valleys, flashing, fasteners — plus the attic side when there is a way in. You get photos and a straight answer.
We match the guard to your trees and your gutter profile, and make sure water can still get in where it is supposed to.
Coatings for low slope and older metal roofs that are still sound but weathered. Washed down, refastened, primed at the rust, then coated.
Old skylights leak at the flashing long before the glass ever fails. We reflash, reseal, or set a new unit and tie it in properly.
Wind and debris damage is not always obvious from the ground. We check the edges, the ridge, the valleys and the fasteners before telling you anything is fine.
A twenty year old panel roof usually needs fasteners and sealant, not replacement. We refasten with new washers and get you another long stretch out of it.
The edge of a roof is where most trouble starts. New fascia, new soffit, wrapped or painted so it stays sound.
Not every hailstorm ruins a roof. We look before we tell you anything, and if the damage is only cosmetic we will say that too.
Full tear off, decking checked board by board, then a new metal or shingle roof over proper underlayment. You get the price and the start date before anything comes off.
Careful footwork, matched materials, and flashing done the way it was done when the roof went on.
A shingle repair should not be visible from the street. We match as close as the weathering allows and blend the new work into the old.
Churches, shops, barns and small commercial buildings. We have roofed everything from a wood shed to a steeple.
Temporary cover goes on fast, then we come back and make the permanent repair once we can see properly what we are working with.
Low slope roofs fail at the joints and around anything that sticks through them. That is where we start, not out in the middle of the field.
The layer you never see is what keeps water out on the ugly days. We do not thin it out to save a few dollars on a bid.
Here is what working with us looks like in French Lick: you call, somebody comes out and measures, and you get a written estimate with the panel or the shingle spelled out on it. If you say go, we schedule you and we show up on that day.
The crew tarps the beds, keeps the yard picked up as they go, and runs a magnet over the drive before pulling out. Small things, but they are the ones French Lick homeowners still mention a year later.
Why people around French Lick call us back and send their neighbors our way.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
Somebody comes out, measures, gets on the roof, and leaves you a written price. No charge, no obligation, and no number that expires if you do not sign today.
Standing seam and metal panel roofs are the work we are known for. Color, trim, fastening pattern — we have done hundreds and we will walk you through all of it.
If your roof needs a repair and not a replacement, we say so. Plenty of our best customers are people we talked out of a job they did not need yet.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
Straight answers to what French Lick homeowners ask us most often.
No. Estimates are always free in French Lick. We come out, measure, look in the attic if we can get to it, and leave you a written price. Nobody will push you to sign anything that day, and the number does not expire in an hour.
A typical French Lick shingle roof runs roughly $8,000 to $18,000 in 2026 for an average single family home, and more if the deck has rot or the roof is steep and cut up with dormers. We do not price off a satellite photo — somebody comes out and measures.
Most French Lick metal roof jobs land somewhere between about $12,000 and $30,000 in 2026, depending on square footage, pitch, panel type and how much tear off there is. Standing seam runs higher than exposed fastener panels. We measure before we quote, and the estimate is free.
Plenty of them. Most French Lick customers choose from around twenty standard colors, and green, burgundy, bronze, black, gray, tan and barn red are the ones people pick most. We bring the color chart out with the estimate so you can hold it up against your siding.
Sometimes. If the decking is sound and there is only one layer of shingles, a French Lick metal roof can go over the top on purlins. If there is rot underneath or two layers already on, we tear off first — and we will tell you that before you sign, not halfway through.
A metal roof installed properly on a French Lick home should give you 40 to 60 years, and standing seam often goes longer because there are no exposed fasteners. Screws and sealants on a panel roof want attention around year 20, which is a small job next to a re-roof.
Honest words from customers who trusted Roofing Brothers with their roof.
"Cannot say enough about how careful they were around the flower beds. Everything got covered and nothing was trampled."
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Standing seam on our log home. The panels are dead straight and the ridge work is clean. You can tell they have done a few of these."
Roofing Brothers also serves these towns near French Lick.